PUBG uses a logarithmic sensitivity scale, so there is no single multiplier. The converter matches your aim exactly: Valorant 0.4 is PUBG 40.
Valorant and PUBG values cross-checked against independent sources on 20 October 2026. PUBG is community-measured.
How do I convert Valorant sensitivity to PUBG?
PUBG sensitivity follows a logarithmic scale (0.004444 × 10^(sens ÷ 50) degrees per mouse count), so no single multiplier converts it. Match cm/360 instead: Valorant 0.4 becomes PUBG 40, and both take 40.8 cm of mouse movement for a full turn at 800 DPI. The converter and chart do this for any value.
- Find your Valorant sensitivity in Settings → General → Mouse → Sensitivity: Aim.
- Type it into the converter above with your DPI, or find it in the chart below.
- In PUBG: Battlegrounds, open Settings → Control → Mouse → General Sensitivity and enter the result.
- Keep the same mouse DPI, or enter your new DPI in the converter.
Going the other way, a typical PUBG setting of 50 is Valorant 0.635, or 25.7 cm per 360° at 800 DPI.
Rounding your PUBG sensitivity
PUBG: Battlegrounds only accepts whole numbers. Valorant 0.4 converts to 39.97, so you would type 40, which turns 0.1% faster than your Valorant aim. To make it exact, keep 40 and set your mouse to 799 DPI in PUBG.
Valorant to PUBG sensitivity chart
Common Valorant settings converted to PUBG. The last two PUBG columns are for switching your mouse to 1600 or 400 DPI at the same time.
| Valorant sensitivity at 800 DPI | PUBG at 800 DPI | PUBG at 1600 DPI | PUBG at 400 DPI | cm/360° |
|---|
| 0.2 | 24.9 | 9.9 | 40 | 81.6 |
| 0.25 | 29.8 | 14.7 | 44.8 | 65.3 |
| 0.3 | 33.7 | 18.7 | 48.8 | 54.4 |
| 0.35 | 37.1 | 22 | 52.1 | 46.7 |
| 0.4 | 40 | 24.9 | 55 | 40.8 |
| 0.45 | 42.5 | 27.5 | 57.6 | 36.3 |
| 0.5 | 44.8 | 29.8 | 59.9 | 32.7 |
| 0.6 | 48.8 | 33.7 | 63.8 | 27.2 |
| 0.7 | 52.1 | 37.1 | 67.2 | 23.3 |
| 0.8 | 55 | 40 | 70.1 | 20.4 |
| 1 | 59.9 | 44.8 | 74.9 | 16.3 |
Valorant and PUBG at a glance
| Valorant | PUBG |
|---|
| Turn per mouse count (yaw) | 0.07 | 0.004444 × 10^(sens ÷ 50) |
| Engine | Unreal Engine 4 | Unreal Engine 4 |
| How the setting is shown | a decimal number | a logarithmic slider (whole numbers 1–100) |
| Typical setting | 0.4 (40.8 cm/360°) | 50 (25.7 cm/360°) |
| Multiply by | varies | varies |
Why Valorant and PUBG numbers differ
Valorant runs on Unreal Engine 4 and PUBG: Battlegrounds on Unreal Engine 4. PUBG does not scale in a straight line: its turn speed per count is 0.004444 × 10^(sens ÷ 50), so the gap between the two games’ numbers changes as the setting changes. The PUBG value is community-measured, because the developer has not published one.
Scoped sensitivity is a separate multiplier, so leave it at 1 if you want scoped aim to match your hipfire feel.
Why does my converted sensitivity feel different?
- Field of view: a wider FOV makes the screen appear to move slower even at the same cm/360.
- Scoped and ADS aim: this matches hipfire only. PUBG’s slider is logarithmic: every 10 points turns about 58% faster, so there is no single multiplier. These numbers assume the default third-person FOV of 80; a wider first-person FOV makes hipfire turn slightly faster. Scope sensitivities are separate sliders.
- Mouse acceleration: if Windows acceleration or a mouse app adds it, the same movement turns a different amount depending on speed. Turn it off.
Frequently asked questions
What is Valorant 0.4 in PUBG?
Valorant 0.4 is PUBG 40 at the same DPI. Both are 40.8 cm per 360° at 800 DPI; PUBG only accepts whole numbers, so round to 40.
What is the PUBG to Valorant multiplier?
There isn’t a fixed one. PUBG uses a logarithmic scale, so the ratio changes with your setting. Use the PUBG to Valorant converter to get an exact value.
Does DPI change the Valorant to PUBG conversion?
Only if you use a different DPI in each game. Enter both DPI values in the converter and it matches cm/360 for you.
Where do I change sensitivity in PUBG: Battlegrounds?
Go to Settings → Control → Mouse → General Sensitivity. PUBG’s slider is logarithmic: every 10 points turns about 58% faster, so there is no single multiplier. These numbers assume the default third-person FOV of 80; a wider first-person FOV makes hipfire turn slightly faster. Scope sensitivities are separate sliders.