PUBG uses a logarithmic sensitivity scale, so there is no single multiplier. The converter matches your aim exactly: PUBG 50 is Overwatch 2 6.73.
PUBG and Overwatch 2 values cross-checked against independent sources on 20 October 2026. PUBG is community-measured.
How do I convert PUBG sensitivity to Overwatch 2?
PUBG sensitivity follows a logarithmic scale (0.004444 × 10^(sens ÷ 50) degrees per mouse count), so no single multiplier converts it. Match cm/360 instead: PUBG 50 becomes Overwatch 2 6.73, and both take 25.7 cm of mouse movement for a full turn at 800 DPI. The converter and chart do this for any value.
- Find your PUBG sensitivity in Settings → Control → Mouse → General Sensitivity.
- Type it into the converter above with your DPI, or find it in the chart below.
- In Overwatch 2, open Options → Controls → General → Sensitivity and enter the result.
- Keep the same mouse DPI, or enter your new DPI in the converter.
Going the other way, a typical Overwatch 2 setting of 5 is PUBG 43.5, or 34.6 cm per 360° at 800 DPI.
PUBG to Overwatch 2 sensitivity chart
Common PUBG settings converted to Overwatch 2. The last two Overwatch 2 columns are for switching your mouse to 1600 or 400 DPI at the same time.
| PUBG sensitivity at 800 DPI | Overwatch 2 at 800 DPI | Overwatch 2 at 1600 DPI | Overwatch 2 at 400 DPI | cm/360° |
|---|
| 30 | 2.68 | 1.34 | 5.36 | 64.6 |
| 35 | 3.37 | 1.69 | 6.75 | 51.3 |
| 40 | 4.25 | 2.12 | 8.5 | 40.8 |
| 45 | 5.35 | 2.67 | 10.7 | 32.4 |
| 50 | 6.73 | 3.37 | 13.47 | 25.7 |
| 55 | 8.48 | 4.24 | 16.95 | 20.4 |
| 60 | 10.67 | 5.34 | 21.34 | 16.2 |
| 65 | 13.43 | 6.72 | 26.87 | 12.9 |
| 70 | 16.91 | 8.46 | 33.83 | 10.2 |
PUBG and Overwatch 2 at a glance
| PUBG | Overwatch 2 |
|---|
| Turn per mouse count (yaw) | 0.004444 × 10^(sens ÷ 50) | 0.0066 |
| Engine | Unreal Engine 4 | Blizzard proprietary engine |
| How the setting is shown | a logarithmic slider (whole numbers 1–100) | a decimal number |
| Typical setting | 50 (25.7 cm/360°) | 5 (34.6 cm/360°) |
| Multiply by | varies | varies |
Why PUBG and Overwatch 2 numbers differ
PUBG: Battlegrounds runs on Unreal Engine 4 and Overwatch 2 on Blizzard proprietary engine. PUBG does not scale in a straight line: its turn speed per count is 0.004444 × 10^(sens ÷ 50), so the gap between the two games’ numbers changes as the setting changes. The PUBG value is community-measured, because the developer has not published one.
PUBG’s slider is logarithmic: every 10 points turns about 58% faster, so there is no single multiplier. These numbers assume the default third-person FOV of 80; a wider first-person FOV makes hipfire turn slightly faster. Scope sensitivities are separate sliders.
Why does my converted sensitivity feel different?
- Field of view: a wider FOV makes the screen appear to move slower even at the same cm/360.
- Scoped and ADS aim: this matches hipfire only. Check Overwatch 2’s own zoom settings.
- Mouse acceleration: if Windows acceleration or a mouse app adds it, the same movement turns a different amount depending on speed. Turn it off.
Frequently asked questions
What is PUBG 50 in Overwatch 2?
PUBG 50 is Overwatch 2 6.73 at the same DPI. Both are 25.7 cm per 360° at 800 DPI.
What is the Overwatch 2 to PUBG multiplier?
There isn’t a fixed one. PUBG uses a logarithmic scale, so the ratio changes with your setting. Use the Overwatch 2 to PUBG converter to get an exact value.
Does DPI change the PUBG to Overwatch 2 conversion?
Only if you use a different DPI in each game. Enter both DPI values in the converter and it matches cm/360 for you.
Where do I change sensitivity in Overwatch 2?
Go to Options → Controls → General → Sensitivity. Overwatch 2 kept the 0.0066 yaw from the original Overwatch, so old Overwatch settings still apply.