PUBG uses a logarithmic sensitivity scale, so there is no single multiplier. The converter matches your aim exactly: PUBG 50 is Fortnite 8%.
PUBG and Fortnite values cross-checked against independent sources on 20 October 2026. PUBG is community-measured.
How do I convert PUBG sensitivity to Fortnite?
PUBG sensitivity follows a logarithmic scale (0.004444 × 10^(sens ÷ 50) degrees per mouse count), so no single multiplier converts it. Match cm/360 instead: PUBG 50 becomes Fortnite 8%, and both take 25.7 cm of mouse movement for a full turn at 800 DPI. The converter and chart do this for any value.
- Find your PUBG sensitivity in Settings → Control → Mouse → General Sensitivity.
- Type it into the converter above with your DPI, or find it in the chart below.
- In Fortnite, open Settings → Mouse & Keyboard → Mouse Sensitivity X and Mouse Sensitivity Y (set both to the same value) and enter the result as a percentage.
- Keep the same mouse DPI, or enter your new DPI in the converter.
Going the other way, a typical Fortnite setting of 6.5% is PUBG 45.5, or 31.7 cm per 360° at 800 DPI.
PUBG to Fortnite sensitivity chart
Common PUBG settings converted to Fortnite. The last two Fortnite columns are for switching your mouse to 1600 or 400 DPI at the same time.
| PUBG sensitivity at 800 DPI | Fortnite at 800 DPI | Fortnite at 1600 DPI | Fortnite at 400 DPI | cm/360° |
|---|
| 30 | 3.18% | 1.59% | 6.37% | 64.6 |
| 35 | 4.01% | 2% | 8.02% | 51.3 |
| 40 | 5.05% | 2.52% | 10.1% | 40.8 |
| 45 | 6.35% | 3.18% | 12.71% | 32.4 |
| 50 | 8% | 4% | 16% | 25.7 |
| 55 | 10.07% | 5.04% | 20.14% | 20.4 |
| 60 | 12.68% | 6.34% | 25.36% | 16.2 |
| 65 | 15.96% | 7.98% | 31.92% | 12.9 |
| 70 | 20.1% | 10.05% | 40.19% | 10.2 |
PUBG and Fortnite at a glance
| PUBG | Fortnite |
|---|
| Turn per mouse count (yaw) | 0.004444 × 10^(sens ÷ 50) | 0.005555 per 1% |
| Engine | Unreal Engine 4 | Unreal Engine 5 |
| How the setting is shown | a logarithmic slider (whole numbers 1–100) | a percentage |
| Typical setting | 50 (25.7 cm/360°) | 6.5% (31.7 cm/360°) |
| Multiply by | varies | varies |
Why PUBG and Fortnite numbers differ
PUBG: Battlegrounds runs on Unreal Engine 4 and Fortnite on Unreal Engine 5. PUBG does not scale in a straight line: its turn speed per count is 0.004444 × 10^(sens ÷ 50), so the gap between the two games’ numbers changes as the setting changes. The PUBG value is community-measured, because the developer has not published one.
PUBG’s slider is logarithmic: every 10 points turns about 58% faster, so there is no single multiplier. These numbers assume the default third-person FOV of 80; a wider first-person FOV makes hipfire turn slightly faster. Scope sensitivities are separate sliders.
Why does my converted sensitivity feel different?
- Field of view: a wider FOV makes the screen appear to move slower even at the same cm/360.
- Scoped and ADS aim: this matches hipfire only. Fortnite shows sensitivity as a percentage. Targeting and scope sensitivity are separate percentages on top of it.
- Mouse acceleration: if Windows acceleration or a mouse app adds it, the same movement turns a different amount depending on speed. Turn it off.
Frequently asked questions
What is PUBG 50 in Fortnite?
PUBG 50 is Fortnite 8% at the same DPI. Both are 25.7 cm per 360° at 800 DPI.
What is the Fortnite to PUBG multiplier?
There isn’t a fixed one. PUBG uses a logarithmic scale, so the ratio changes with your setting. Use the Fortnite to PUBG converter to get an exact value.
Does DPI change the PUBG to Fortnite conversion?
Only if you use a different DPI in each game. Enter both DPI values in the converter and it matches cm/360 for you.
Where do I change sensitivity in Fortnite?
Go to Settings → Mouse & Keyboard → Mouse Sensitivity X and Mouse Sensitivity Y (set both to the same value). Fortnite shows sensitivity as a percentage. Targeting and scope sensitivity are separate percentages on top of it.