CS2 and Aim Lab values cross-checked against independent sources on 20 October 2026.
How do I convert CS2 sensitivity to Aim Lab?
To convert CS2 sensitivity to Aim Lab, multiply it by 0.44. CS2 turns 0.022° per mouse count and Aim Lab turns 0.05°, so CS2 1.2 becomes Aim Lab 0.528. Keep the same DPI and both settings take 43.3 cm of mouse movement for a full turn.
- Find your CS2 sensitivity in Settings → Keyboard / Mouse → Mouse Sensitivity (or type sensitivity in the console).
- Multiply it by 0.44, or type it into the converter above with your DPI.
- In Aim Lab, open Settings → Mouse → Sensitivity, with the sensitivity scale set to Aim Lab and enter the result.
- Keep the same mouse DPI, or enter your new DPI in the converter.
Going the other way, a typical Aim Lab setting of 0.5 is CS2 1.136, or 45.7 cm per 360° at 800 DPI.
CS2 to Aim Lab sensitivity chart
Common CS2 settings converted to Aim Lab. The last two Aim Lab columns are for switching your mouse to 1600 or 400 DPI at the same time.
| CS2 sensitivity at 800 DPI | Aim Lab at 800 DPI | Aim Lab at 1600 DPI | Aim Lab at 400 DPI | cm/360° |
|---|
| 0.8 | 0.352 | 0.176 | 0.704 | 64.9 |
| 1 | 0.44 | 0.22 | 0.88 | 52 |
| 1.2 | 0.528 | 0.264 | 1.056 | 43.3 |
| 1.4 | 0.616 | 0.308 | 1.232 | 37.1 |
| 1.6 | 0.704 | 0.352 | 1.408 | 32.5 |
| 1.8 | 0.792 | 0.396 | 1.584 | 28.9 |
| 2 | 0.88 | 0.44 | 1.76 | 26 |
| 2.2 | 0.968 | 0.484 | 1.936 | 23.6 |
| 2.5 | 1.1 | 0.55 | 2.2 | 20.8 |
| 3 | 1.32 | 0.66 | 2.64 | 17.3 |
CS2 and Aim Lab at a glance
| CS2 | Aim Lab |
|---|
| Turn per mouse count (yaw) | 0.022 | 0.05 |
| Engine | Source 2 | Unity (aim trainer) |
| How the setting is shown | a decimal number | a decimal number |
| Typical setting | 1.2 (43.3 cm/360°) | 0.5 (45.7 cm/360°) |
| Multiply by | ×0.44 | ×2.2727 |
Why CS2 and Aim Lab numbers differ
Counter-Strike 2 runs on Source 2 and Aim Lab on Unity (aim trainer). Aim Lab numbers are 2.27× smaller than CS2 numbers for the same hand movement, because Aim Lab turns more per mouse count.
CS2 uses the same 0.022 yaw as CS:GO, so a CS:GO sensitivity carries over to CS2 unchanged.
Why does my converted sensitivity feel different?
- Field of view: a wider FOV makes the screen appear to move slower even at the same cm/360.
- Scoped and ADS aim: this matches hipfire only. Check Aim Lab’s own zoom settings.
- Mouse acceleration: if Windows acceleration or a mouse app adds it, the same movement turns a different amount depending on speed. Turn it off.
Frequently asked questions
What is CS2 1.2 in Aim Lab?
CS2 1.2 is Aim Lab 0.528 at the same DPI. Both are 43.3 cm per 360° at 800 DPI.
What is the Aim Lab to CS2 multiplier?
Multiply Aim Lab sensitivity by 2.2727 to get CS2. Use the Aim Lab to CS2 converter for the full chart.
Does DPI change the CS2 to Aim Lab multiplier?
No. The ×0.44 multiplier holds at any DPI as long as you use the same DPI in both games. If you change DPI, divide by the ratio of new DPI to old DPI, or enter both values in the converter.
Where do I change sensitivity in Aim Lab?
Go to Settings → Mouse → Sensitivity, with the sensitivity scale set to Aim Lab. Aim Lab can copy any game’s sensitivity scale. These numbers assume its own Aim Lab scale; if you picked another game’s scale, enter that game’s sensitivity instead.