The Finals and Valorant values cross-checked against independent sources on 20 October 2026. The Finals is community-measured.
How do I convert The Finals sensitivity to Valorant?
To convert The Finals sensitivity to Valorant, multiply it by 0.0143. The Finals turns 0.001° per mouse count and Valorant turns 0.07°, so The Finals 40 becomes Valorant 0.571. Keep the same DPI and both settings take 28.6 cm of mouse movement for a full turn.
- Find your The Finals sensitivity in the mouse sensitivity setting in the Controls menu.
- Multiply it by 0.0143, or type it into the converter above with your DPI.
- In Valorant, open Settings → General → Mouse → Sensitivity: Aim and enter the result.
- Keep the same mouse DPI, or enter your new DPI in the converter.
Going the other way, a typical Valorant setting of 0.4 is The Finals 28, or 40.8 cm per 360° at 800 DPI.
The Finals to Valorant sensitivity chart
Common The Finals settings converted to Valorant. The last two Valorant columns are for switching your mouse to 1600 or 400 DPI at the same time.
| The Finals sensitivity at 800 DPI | Valorant at 800 DPI | Valorant at 1600 DPI | Valorant at 400 DPI | cm/360° |
|---|
| 20 | 0.286 | 0.143 | 0.571 | 57.1 |
| 25 | 0.357 | 0.179 | 0.714 | 45.7 |
| 30 | 0.429 | 0.214 | 0.857 | 38.1 |
| 35 | 0.5 | 0.25 | 1 | 32.7 |
| 40 | 0.571 | 0.286 | 1.143 | 28.6 |
| 50 | 0.714 | 0.357 | 1.429 | 22.9 |
| 60 | 0.857 | 0.429 | 1.714 | 19.1 |
| 70 | 1 | 0.5 | 2 | 16.3 |
The Finals and Valorant at a glance
| The Finals | Valorant |
|---|
| Turn per mouse count (yaw) | 0.001 | 0.07 |
| Engine | Unreal Engine 5 | Unreal Engine 4 |
| How the setting is shown | a decimal number | a decimal number |
| Typical setting | 40 (28.6 cm/360°) | 0.4 (40.8 cm/360°) |
| Multiply by | ×0.0143 | ×70 |
Why The Finals and Valorant numbers differ
THE FINALS runs on Unreal Engine 5 and Valorant on Unreal Engine 4. Valorant numbers are 70× smaller than The Finals numbers for the same hand movement, because Valorant turns more per mouse count. The The Finals value is community-measured, because the developer has not published one.
Aim-down-sights sensitivity is a separate setting.
Why does my converted sensitivity feel different?
- Field of view: a wider FOV makes the screen appear to move slower even at the same cm/360.
- Scoped and ADS aim: this matches hipfire only. Scoped sensitivity is a separate multiplier, so leave it at 1 if you want scoped aim to match your hipfire feel.
- Mouse acceleration: if Windows acceleration or a mouse app adds it, the same movement turns a different amount depending on speed. Turn it off.
Frequently asked questions
What is The Finals 40 in Valorant?
The Finals 40 is Valorant 0.571 at the same DPI. Both are 28.6 cm per 360° at 800 DPI.
What is the Valorant to The Finals multiplier?
Multiply Valorant sensitivity by 70 to get The Finals. Use the Valorant to The Finals converter for the full chart.
Does DPI change the The Finals to Valorant multiplier?
No. The ×0.0143 multiplier holds at any DPI as long as you use the same DPI in both games. If you change DPI, divide by the ratio of new DPI to old DPI, or enter both values in the converter.
Where do I change sensitivity in Valorant?
Go to Settings → General → Mouse → Sensitivity: Aim. Scoped sensitivity is a separate multiplier, so leave it at 1 if you want scoped aim to match your hipfire feel.