BF6 uses a offset sensitivity scale, so there is no single multiplier. The converter matches your aim exactly: BF6 30 is Fortnite 9.79%.
BF6 and Fortnite values cross-checked against independent sources on 20 October 2026. BF6 is community-measured.
How do I convert BF6 sensitivity to Fortnite?
BF6 sensitivity follows a offset scale (0.0017362 × sens + 0.002315 degrees per mouse count), so no single multiplier converts it. Match cm/360 instead: BF6 30 becomes Fortnite 9.79%, and both take 21 cm of mouse movement for a full turn at 800 DPI. The converter and chart do this for any value.
- Find your BF6 sensitivity in the soldier mouse sensitivity setting in the Mouse & Keyboard controls.
- Type it into the converter above with your DPI, or find it in the chart below.
- In Fortnite, open Settings → Mouse & Keyboard → Mouse Sensitivity X and Mouse Sensitivity Y (set both to the same value) and enter the result as a percentage.
- Keep the same mouse DPI, or enter your new DPI in the converter.
Going the other way, a typical Fortnite setting of 6.5% is BF6 19.5, or 31.7 cm per 360° at 800 DPI.
BF6 to Fortnite sensitivity chart
Common BF6 settings converted to Fortnite. The last two Fortnite columns are for switching your mouse to 1600 or 400 DPI at the same time.
| BF6 sensitivity at 800 DPI | Fortnite at 800 DPI | Fortnite at 1600 DPI | Fortnite at 400 DPI | cm/360° |
|---|
| 15 | 5.11% | 2.55% | 10.21% | 40.3 |
| 20 | 6.67% | 3.33% | 13.34% | 30.9 |
| 25 | 8.23% | 4.12% | 16.46% | 25 |
| 30 | 9.79% | 4.9% | 19.59% | 21 |
| 35 | 11.36% | 5.68% | 22.71% | 18.1 |
| 40 | 12.92% | 6.46% | 25.84% | 15.9 |
| 50 | 16.04% | 8.02% | 32.09% | 12.8 |
BF6 and Fortnite at a glance
| BF6 | Fortnite |
|---|
| Turn per mouse count (yaw) | 0.0017362 × sens + 0.002315 | 0.005555 per 1% |
| Engine | Frostbite | Unreal Engine 5 |
| How the setting is shown | a slider with a fixed offset | a percentage |
| Typical setting | 30 (21 cm/360°) | 6.5% (31.7 cm/360°) |
| Multiply by | varies | varies |
Why BF6 and Fortnite numbers differ
Battlefield 6 runs on Frostbite and Fortnite on Unreal Engine 5. BF6 does not scale in a straight line: its turn speed per count is 0.0017362 × sens + 0.002315, so the gap between the two games’ numbers changes as the setting changes. The BF6 value is community-measured, because the developer has not published one.
Battlefield 6 adds a fixed offset to every value, so a setting of 40 is not twice as fast as 20 and there is no single multiplier. Zoom and ADS sensitivity are set separately.
Why does my converted sensitivity feel different?
- Field of view: a wider FOV makes the screen appear to move slower even at the same cm/360.
- Scoped and ADS aim: this matches hipfire only. Fortnite shows sensitivity as a percentage. Targeting and scope sensitivity are separate percentages on top of it.
- Mouse acceleration: if Windows acceleration or a mouse app adds it, the same movement turns a different amount depending on speed. Turn it off.
Frequently asked questions
What is BF6 30 in Fortnite?
BF6 30 is Fortnite 9.79% at the same DPI. Both are 21 cm per 360° at 800 DPI.
What is the Fortnite to BF6 multiplier?
There isn’t a fixed one. BF6 uses a offset scale, so the ratio changes with your setting. Use the Fortnite to BF6 converter to get an exact value.
Does DPI change the BF6 to Fortnite conversion?
Only if you use a different DPI in each game. Enter both DPI values in the converter and it matches cm/360 for you.
Where do I change sensitivity in Fortnite?
Go to Settings → Mouse & Keyboard → Mouse Sensitivity X and Mouse Sensitivity Y (set both to the same value). Fortnite shows sensitivity as a percentage. Targeting and scope sensitivity are separate percentages on top of it.